E
Erik Andersen
Hi All
I am having difficulties setting up the lighttpd.conf file for running Ruby
on Rails on my windows 2003 server. I have actually managed to get it up
and running by trial and error, but it is very slow.
Not fully understanding the lighttpd.conf file I suspect that maybe it is
not running fastcgi, but only cgi since I have heard that this would be slow.
Maybe it it is not necessary to include the mod_cgi at all ?
My lighttpd.con file i pasted below. Any ideas are most welcome.
lighttpd.conf
----
# lighttpd configuration file
#
# use a it as base for lighttpd 1.0.0 and above
#
# $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $
############ Options you really have to take care of ####################
## modules to load
# at least mod_access and mod_accesslog should be loaded
# all other module should only be loaded if really neccesary
# - saves some time
# - saves memory
server.modules = (
"mod_rewrite",
"mod_redirect",
# "mod_alias",
"mod_access",
# "mod_cml",
# "mod_trigger_b4_dl",
# "mod_auth",
# "mod_status",
# "mod_setenv",
"mod_fastcgi",
# "mod_proxy",
# "mod_simple_vhost",
# "mod_evhost",
# "mod_userdir",
"mod_cgi",
# "mod_compress",
# "mod_ssi",
# "mod_usertrack",
# "mod_expire",
# "mod_secdownload",
# "mod_rrdtool",
"mod_accesslog" )
server.document-root = "E:/apache2triad/htdocs/appname/public"
## where to send error-messages to
server.errorlog = "C:/lighttpd/logs/lighttpd.error.log"
# files to check for if .../ is requested
server.indexfiles = ( "index.php", "index.html", "dispatch.fcgi" )
server.error-handler-404 = "/dispatch.fcgi"
# mimetype mapping
mimetype.assign = (
".pdf" => "application/pdf",
".sig" => "application/pgp-signature",
".spl" => "application/futuresplash",
".class" => "application/octet-stream",
".ps" => "application/postscript",
".torrent" => "application/x-bittorrent",
".dvi" => "application/x-dvi",
".gz" => "application/x-gzip",
".pac" => "application/x-ns-proxy-autoconfig",
".swf" => "application/x-shockwave-flash",
".tar.gz" => "application/x-tgz",
".tgz" => "application/x-tgz",
".tar" => "application/x-tar",
".zip" => "application/zip",
".mp3" => "audio/mpeg",
".m3u" => "audio/x-mpegurl",
".wma" => "audio/x-ms-wma",
".wax" => "audio/x-ms-wax",
".ogg" => "application/ogg",
".wav" => "audio/x-wav",
".gif" => "image/gif",
".jpg" => "image/jpeg",
".jpeg" => "image/jpeg",
".png" => "image/png",
".xbm" => "image/x-xbitmap",
".xpm" => "image/x-xpixmap",
".xwd" => "image/x-xwindowdump",
".css" => "text/css",
".html" => "text/html",
".htm" => "text/html",
".js" => "text/javascript",
".asc" => "text/plain",
".c" => "text/plain",
".cpp" => "text/plain",
".log" => "text/plain",
".conf" => "text/plain",
".text" => "text/plain",
".txt" => "text/plain",
".dtd" => "text/xml",
".xml" => "text/xml",
".mpeg" => "video/mpeg",
".mpg" => "video/mpeg",
".mov" => "video/quicktime",
".qt" => "video/quicktime",
".avi" => "video/x-msvideo",
".asf" => "video/x-ms-asf",
".asx" => "video/x-ms-asf",
".wmv" => "video/x-ms-wmv",
".bz2" => "application/x-bzip",
".tbz" => "application/x-bzip-compressed-tar",
".tar.bz2" => "application/x-bzip-compressed-tar"
)
#### accesslog module
accesslog.filename = "C:/lighttpd/logs/access.log"
## deny access the file-extensions
#
# ~ is for backupfiles from vi, emacs, joe, ...
# .inc is often used for code includes which should in general not be part
# of the document-root
url.access-deny = ( "~", ".inc" )
$HTTP["url"] =~ "\.pdf$" {
server.range-requests = "disable"
}
######### Options that are good to be but not neccesary to be changed #######
## bind to port (default: 80)
server.port = 81
## bind to localhost (default: all interfaces)
#server.bind = "grisu.home.kneschke.de"
## error-handler for status 404
#server.error-handler-404 = "/error-handler.html"
#server.error-handler-404 = "/error-handler.php"
## to help the rc.scripts
#server.pid-file = "/var/run/lighttpd.pid"
## enable debugging
#debug.log-request-header = "enable"
#debug.log-response-header = "enable"
#debug.log-request-handling = "enable"
#debug.log-file-not-found = "enable"
# You need to let Ruby handle .rb, .cgi and .fcgi files
cgi.assign = ( ".rb" => "E:/ruby/bin/rubyw.exe",
".fcgi" => "E:/ruby/bin/rubyw.exe",
".cgi" => "E:/ruby/bin/rubyw.exe")
# 5 .fcgi spawns seem to work fine for a reasonable load
fastcgi.server = (
".fcgi" =>
( "appname" =>
( "min-procs" => 1,
"max-procs" => 2,
"socket" => "E:/apache2triad/htdocs/appname/public/tmp/ruby-railsapp.fastcgi",
"bin-path" => "E:/apache2triad/htdocs/appname/public/dispatch.fcgi",
"bin-environment" => ("RAILS_ENV" => "development")
)
)
)
I am having difficulties setting up the lighttpd.conf file for running Ruby
on Rails on my windows 2003 server. I have actually managed to get it up
and running by trial and error, but it is very slow.
Not fully understanding the lighttpd.conf file I suspect that maybe it is
not running fastcgi, but only cgi since I have heard that this would be slow.
Maybe it it is not necessary to include the mod_cgi at all ?
My lighttpd.con file i pasted below. Any ideas are most welcome.
lighttpd.conf
----
# lighttpd configuration file
#
# use a it as base for lighttpd 1.0.0 and above
#
# $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $
############ Options you really have to take care of ####################
## modules to load
# at least mod_access and mod_accesslog should be loaded
# all other module should only be loaded if really neccesary
# - saves some time
# - saves memory
server.modules = (
"mod_rewrite",
"mod_redirect",
# "mod_alias",
"mod_access",
# "mod_cml",
# "mod_trigger_b4_dl",
# "mod_auth",
# "mod_status",
# "mod_setenv",
"mod_fastcgi",
# "mod_proxy",
# "mod_simple_vhost",
# "mod_evhost",
# "mod_userdir",
"mod_cgi",
# "mod_compress",
# "mod_ssi",
# "mod_usertrack",
# "mod_expire",
# "mod_secdownload",
# "mod_rrdtool",
"mod_accesslog" )
server.document-root = "E:/apache2triad/htdocs/appname/public"
## where to send error-messages to
server.errorlog = "C:/lighttpd/logs/lighttpd.error.log"
# files to check for if .../ is requested
server.indexfiles = ( "index.php", "index.html", "dispatch.fcgi" )
server.error-handler-404 = "/dispatch.fcgi"
# mimetype mapping
mimetype.assign = (
".pdf" => "application/pdf",
".sig" => "application/pgp-signature",
".spl" => "application/futuresplash",
".class" => "application/octet-stream",
".ps" => "application/postscript",
".torrent" => "application/x-bittorrent",
".dvi" => "application/x-dvi",
".gz" => "application/x-gzip",
".pac" => "application/x-ns-proxy-autoconfig",
".swf" => "application/x-shockwave-flash",
".tar.gz" => "application/x-tgz",
".tgz" => "application/x-tgz",
".tar" => "application/x-tar",
".zip" => "application/zip",
".mp3" => "audio/mpeg",
".m3u" => "audio/x-mpegurl",
".wma" => "audio/x-ms-wma",
".wax" => "audio/x-ms-wax",
".ogg" => "application/ogg",
".wav" => "audio/x-wav",
".gif" => "image/gif",
".jpg" => "image/jpeg",
".jpeg" => "image/jpeg",
".png" => "image/png",
".xbm" => "image/x-xbitmap",
".xpm" => "image/x-xpixmap",
".xwd" => "image/x-xwindowdump",
".css" => "text/css",
".html" => "text/html",
".htm" => "text/html",
".js" => "text/javascript",
".asc" => "text/plain",
".c" => "text/plain",
".cpp" => "text/plain",
".log" => "text/plain",
".conf" => "text/plain",
".text" => "text/plain",
".txt" => "text/plain",
".dtd" => "text/xml",
".xml" => "text/xml",
".mpeg" => "video/mpeg",
".mpg" => "video/mpeg",
".mov" => "video/quicktime",
".qt" => "video/quicktime",
".avi" => "video/x-msvideo",
".asf" => "video/x-ms-asf",
".asx" => "video/x-ms-asf",
".wmv" => "video/x-ms-wmv",
".bz2" => "application/x-bzip",
".tbz" => "application/x-bzip-compressed-tar",
".tar.bz2" => "application/x-bzip-compressed-tar"
)
#### accesslog module
accesslog.filename = "C:/lighttpd/logs/access.log"
## deny access the file-extensions
#
# ~ is for backupfiles from vi, emacs, joe, ...
# .inc is often used for code includes which should in general not be part
# of the document-root
url.access-deny = ( "~", ".inc" )
$HTTP["url"] =~ "\.pdf$" {
server.range-requests = "disable"
}
######### Options that are good to be but not neccesary to be changed #######
## bind to port (default: 80)
server.port = 81
## bind to localhost (default: all interfaces)
#server.bind = "grisu.home.kneschke.de"
## error-handler for status 404
#server.error-handler-404 = "/error-handler.html"
#server.error-handler-404 = "/error-handler.php"
## to help the rc.scripts
#server.pid-file = "/var/run/lighttpd.pid"
## enable debugging
#debug.log-request-header = "enable"
#debug.log-response-header = "enable"
#debug.log-request-handling = "enable"
#debug.log-file-not-found = "enable"
# You need to let Ruby handle .rb, .cgi and .fcgi files
cgi.assign = ( ".rb" => "E:/ruby/bin/rubyw.exe",
".fcgi" => "E:/ruby/bin/rubyw.exe",
".cgi" => "E:/ruby/bin/rubyw.exe")
# 5 .fcgi spawns seem to work fine for a reasonable load
fastcgi.server = (
".fcgi" =>
( "appname" =>
( "min-procs" => 1,
"max-procs" => 2,
"socket" => "E:/apache2triad/htdocs/appname/public/tmp/ruby-railsapp.fastcgi",
"bin-path" => "E:/apache2triad/htdocs/appname/public/dispatch.fcgi",
"bin-environment" => ("RAILS_ENV" => "development")
)
)
)