ISQED'06 CFP

I

ISQED

CALL FOR PARTICIPATION

7th IEEE International Symposium on

Quality Electronic Design - ISQED'06



The Leading Conference on Design for Manufacturing & Quality

March 27-29, 2006
DoubleTree Hotel, San Jose, CA, USA



Advance Registration deadline: March 14, 2006



www.isqed.org

REGISTRATION
Please refer to ISQED web site at www.isqed.org for information regarding
the tutorials, conference, exhibits, and hotel registration. Direct all
conference inquiries to (e-mail address removed). Early registration is recommended
to take advantage of the discounted registration fee.


CONFERENCE HIGHLIGHTS
TUTORIALS/WORKSHOPS
ISQED 2006 is pleased to offer a single full-day tutorial track, presented
by six experts in their respective fields. This tutorial track consists of
two (2) major topics shown below. The first topic examines the critical and
timely issues of "variability" and its impact in design with 65nm and finer
CMOS technologies. The second topic explores the exciting field of emerging
Nanoelectronic technologies and their application toward future ULSI
designs.

Variability and Its Impact on Design
Speakers:
Dr. Keith Bowman, Intel Corporation
Dr. Michael Orshansky, University of Texas-Austin
Dr. Sachin S. Sapatnekar, University of Minnesota

Emerging Technologies for VLSI Design
Speakers:
Dr. Rajiv Joshi, IBM T J Watson Research Center, NY
Dr. Kaustav Banerjee, University of California, Santa Barbara, CA
Dr. Andre DeHon, California Institute of Technology, Pasadena, CA

PLENARY SESSIONS
Two plenary sessions will be held on Tuesday and Wednesday mornings. Six
industry & academia leaders will discuss the issues surrounding electronic
design, design for yield and manufacturability and other critical topics
from various points of view. Plenary keynote speakers are:

Dr. Risto Suoranta, Principal scientist & Research Fellow, Nokia Research
Center
Dr. Tohru Furuyama, GM, Toshiba SoC Research and Development Center
Dr. Di Ma, Vice President of Field Technical Support, TSMC
Dr. Raul Camposano, Sr. Vice President, CTO, and GM, Synopsys
Dr. Changhyun Kim, Vice President and Fellow, Samsung Electronics
Dr. Philip Wong , Professor, Stanford University

PANEL DISCUSSIONS
ISQED is pleased to offer two high-power evening panel discussion sessions,
where many leading experts, address the important issue of quality design.
These panels would focus on the following topics:

1 Power management and optimization challenges for sub 90nm CMOS
designs - What is the real cost of long battery life?
2 Soft IP Quality: Who is really responsible for quality throughout
the design process?

LUNCHEON SPEECH
Simplicity and Executability: Cornerstones of Quality
Michael Keating, Synopsys

VENDOR EXHIBITION
The exhibition is being held for the 1st time in conjunction with ISQED,
features vendors who offer design tools and methodologies in the area of
design for manufacturing and quality. Exhibit floor will be open on Tuesday
March 28, in parallel with technical sessions. Complementary registration is
available through the ISQED web site.

TECHNICAL SESSIONS
ISQED Technical sessions start on Tuesday March 27, and continue until the
afternoon of Wednesday, March 29. Beside the above plenary sessions, panel
discussions, and workshops, the program consists of nineteen technical
sessions featuring over100 papers on various challenging topics related to
design for manufacturability and quality. A partial list of topics is shown
below. Detail program would be available on the web at www.isqed.org.

0 EDA Tools, Flows & IP Blocks; Interoperability and Implications
(EDA)
0 Design for Manufacturability & Quality (DFMQ)
0 Design Verification and Design for Testability (DVFT)
0 Package - IC Design Interactions & Co-Design (PDI)
0 Robust Device, Interconnect, and Circuits (RDIC)
0 Physical Design, Methodologies & Tools (PDM)
0 Effects of Technology on IC Design, Performance, Reliability, and
Yield (TRD)
0 System Level Design, Methodologies and Tools (SDM)

REGISTRATION
Please refer to ISQED web site at www.isqed.org for information regarding
the tutorials, conference, tutorials, and hotel registration. Direct all
conference inquiries to (e-mail address removed). Early registration is recommended
to take advantage of the discounted registration fee.



About ISQED
The International Symposium on Quality Electronic Design (ISQED) is a
premier Manufacturing, Design & Design Automation conference, aimed at
bridging the gap among electronic design tools and processes, integrated
circuit technologies, processes & manufacturing, to achieve design quality.
ISQED is the pioneer and leading conference dealing with design for
manufacturability and quality issues front-to-back. The conference attendees
are primarily designers of the VLSI circuits & systems (IP & SoC),
process/device technologists, semiconductor manufacturing specialists
including equipment vendors, and those involved in the R&D and application
of EDA Tools & design flows. ISQED emphasizes a holistic approach toward
design quality and intends to highlight and accelerate cooperation among the
IC Design, EDA, Semiconductor Process Technology and Manufacturing
communities. The conference spans three days, Monday through Wednesday, in
three parallel tracks, hosting over 100 technical papers, six keynote
speakers, two panel discussions, workshops /tutorials and other informal
meetings. ISQED proceedings are published by IEEE Computer Society and
hosted in the digital library. Proceedings CD ROMs are published by ACM.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Members online

No members online now.

Forum statistics

Threads
473,994
Messages
2,570,223
Members
46,812
Latest member
GracielaWa

Latest Threads

Top